Mainboard and Handpiece software compatibility table

• Related Articles

• Warning E11: communication between the handpiece and mainboard of main console is abnormal

  Note: In light of the incompatibility of version, main console software versions L0-A-1.0.129, L0-A-1.0.133 and L0-A-1.0.134 are incompatible with the handpiece software version L4-A-1.0.001 (or the customized version based on this version). Prior to ...

• Lasermach Software Upgrade steps

       1、Prepare ARM board programming        Computer install “One-click install Android driver”first.       Connect the Android cable to ARM board and computer.           Press and hold the PWR button on the  ARM board and power on system same time. ...

• Warning E06 E07: The cooling power supply for the handpiece can't be turned off ; no power input for handpiece cooling

  This failure means the “failure of handpiece refrigeration control” or “no power input of handpiece refrigeration”. Replace mainboard of main console at this time.

• Warning E08: handpiece cooling failure and component emittng heat

  Prepare tools as below: Multimeter,hair dryer   Under the condition of continuous and normal laser shot from the handpiece for 1 minute,if the “Temp” on screen remains more than 10℃ for a long time,then the device prompts E08. 1. We touch the head of ...

• Renuva Software Upgrade steps

  Tips: Scope of application: Engineer Applicable grade: Professional Service tools:  Phillips screwdriver、 Inner Hexagon spanner ​ I. ARM Board Android line connected with the ARM Board and computer Hold down the PWR key on the ARM Board and power up. ...