Warning E09: the temperature of laser bar exceeds the upper limit

• Related Articles

• Warning W09 W12: water pump temperature exceeds the upper limit ; compressor temperature exceeds the upper limit

  a)  This failure means that “water pump temperature exceeds the upper limit” or “compressor temperature exceeds the upper limit”. It is very likely to be caused by the long-time high-energy laser emission of handpiece. This prompt will disappear ...

• Warning W06: temperature of handpiece treatment head exceeds the upper limit

   a) This failure means that “temperature of handpiece treatment head exceeds the upper limit”, and test should be implemented only under the ready state.      b) If handpiece refrigeration fails or temperature is increased under the ready state, ...

• Warning W08: temperature of water tank exceeds the scope

  a) This failure means that “temperature of water tank exceeds the scope”. It is very likely to be caused by the long-time high-energy laser emission. The prompt will disappear automatically after water tank temperature is recovered. b) If the failure ...

• Warning W10: room temperature exceeds the uppper limit

  a) This failure means that “room temperature exceeds the upper limit”. This prompt will disappear automatically after the room temperature is recovered. b) If this problem occurs frequently, replace the temperature sensor. c) If this problem cannot ...

• Warning W07: temperature of handpiece treatment head exceeds the lower limit

  a) This failure means that “temperature of handpiece treatment head exceeds the lower limit". It does not occur in general. Once the problem above happens, consider replacing the main control board of main console.